Pegasus-600IIn-line type PCBA coating equipment
2 types of nozzle + image processing technology to realize optimum coating operation
| Film coat nozzle | |
|---|---|
| Recommended coating width | 10mm |
| Recommended clearance | 10mm |
| Coating direction | 0°-180° |
| Needle nozzle | |
|---|---|
| Attached needle | Inner diameter : 0.41mm Outer diameter : 0.71mm Hand length: L = 13mm ※Needle length up to L=50mm |
| Recommended coating width | 3mm |
| Recommended clearance | 3mm |
Images are recognized by the camera built into the system.
Intuitively designate the coating area while viewing the image of the entire board on the monitor
- Creation of teaching data using printed circuit board images
- Discrimination between front and back of the board and the direction of conveyance
- Coating position correction by reading the reference position
- Detection of splatter in no-coating areas and missing coating after application
Easy setting of coating area
- Specify the coating range arbitrarily
- Automatic nozzle selection
- Simulation of coating path
Checking the coating condition using image processing
- Check the coating condition with UV illumination.
- Integrated inspection function detects coating defects
Options
*Please see the table by scrolling horizontally.
| Product name | Photos | Function |
|---|---|---|
| Offline teaching software Pegasus Editor |
－ | Teaching data can be created and edited offline while the equipment is in operation. |
| Tank heater |  |
A silicone rubber heater is wrapped around the tank to keep the conformal coating material warm, ensuring stable coating performance. ※When using heaters the power supply is AC200V (single phase) |
| Operation switch |  |
Coating start operation is possible when using the product on a batch production line that does not require coupling with the upstream and downstream equipment. |
| In the in-line production process, if a NG occurs in the coating process, selection of whether the board is flowed down-stream can be made. | ||
| Coating agent desiccating furnace Pegasus Dryer-250I |
 |
Dedicated drying oven that can shorten the time until finger touch drying after coating with a coating agent by connecting to a Pegasus. Odor recovery by exhaust duct. Power supply for dryer is AC200V (single phase) |
*Please see the table by scrolling horizontally.
Specifications
*Please see the table by scrolling horizontally.
| PCBAs to be inspected | M size | ○ |
|---|---|---|
| L size | × | |
| Dimensions | 50mm (W) ×50mm (D) to 330mm (W) ×250mm (D) | |
| Thickness of PCBA | 0.5 to 2.0mm | |
| Maximum weight of PCBA | 3kg | |
| Height limit of PCBA (Clearance) | Upper side | 80mm |
| Under side | 80mm | |
| Coating range | 330mm × 250mm * Board end 3mm (transfer margin) is not available. |
|
| Coating nozzle | Film coating: Recommended coating width 10mm Needle : Recommended coating width 3mm |
|
| Coating direction | 0°to 180° | |
| Coating speed | 50 to 500mm/s° | |
| Repeatability of positioning | ±50μm | |
| Camera | Yes (PCBA insertion direction, coating inspection) | |
| Lighting apparatus | Warm white LED+UV LED | |
| Coating inspection items | Missing coating, over flow, splatter to no-coating area | |
| Inspectable size | Φ1mm or more | |
| Inspection speed | 2,200mm2/s | |
| Flow direction of PCBA | Right-to-Left (standard specification) / Left-to-Right (selectable at the time of order) |
|
| Width adjustment for transferring conveyor | Automatic | |
| Pass line | 920±50mm | |
| Monitor | 10.1" touch panel monitor | |
| PC | OS | Windows 11 Professional 64bit Japanese/English (selectable at the time of order) |
| Memory | 8GB | |
| Interface between equipments | SMEMA standard compliant | |
| Environment conditions for operation | 10 to 35℃/30 to 80%RH (no condensation) | |
| Environment conditions for storage | -10 to 60℃/30 to 80%RH (no condensation) | |
| Power supply | AC100 to 240V (single phase) 50/60Hz(AC200V when tank heaters are installed) |
|
| Power consumption | 300VA(440VA when tank heaters are installed) | |
| Compressed air consumption | Compressed air ：0.5MPa Air consumption ：5Nℓ/min |
|
| Dimensions of main unit (excluding protruding portion) |
W1,410×D960×H1,490mm * At a pass line height of 900mm |
|
| Weight (excluding PC) | 250kg | |
*Please see the table by scrolling horizontally.